Favorilerime ekle Replacement Belt for Sinclair ZX Printer

Retro Computers >> Sinclair >> Sinclair ZX Spectrum >> Components
Listing type:
Fixed Price Multiple Items
Item Condition:
Satıcı konumu:
Stoke-on-Trent, Staffordshire, United Kingdom
Sonlanma süresi:
28 gün, 19h:41m:27s
Quantity Available
Son alıcı:
T***t (2)
Sabit fiyat:
£16.80 Hemen al!
20.00% VAT, Duty and handling fees may be payable on Price & Shipping on receipt
Shipping Costs:
From only £1.80
Ödeme türleri:
Paypal, Bank transfer
Number Sold:
3 (Geçmişi gör)
Alıcı Değer Tarih ve saat Alınan miktar
T***t (2) £16.80 20/09/2022  12:05:11 1
d***e (33) £16.80 31/07/2022  22:22:32 1
B***K (1) £16.80 16/07/2022  16:10:54 1
Feedback on this Item
OlumluOlumlu B***K (1) Great item, works a treat would definitely buy from you again! Quick delivery too!
Seller's Response
Thank you for you feedback-we appreciate it
05/08/2022  18:27:07

Item Number : 62398

Satıcıyı gör

rwap_software (3724) User Offline

Important: Alıcılara Mesaj

Product Waste:
We are registered for WEEE and the German Extended Producer Regulations (DE5098334825925)



We are continuing to trade as normal for now - but will be posting items only once per week.

When ordering 2+ different items from RWAP Software, please request an invoice so that we can combine shipping.

Contact the Seller
Add Seller To Favourites
See Other Items

Dükkanını gör RWAP Software - Retro computer specialists

Sabit fiyat: £16.80
Watch Item


UK ONLY - for non-UK see:

These are the replacement ZX Printer belts offered by Johan replacement ZX Printer belt is 3D printed in a material called TPU which is a highly flexible material. The shore hardness is 95A, very close to the original belt.

In order to use this belt you´ll have to dismantle the printer and we suggest you read the ZX Printer service manual found at https://spectrumforeveryone.com/wp-content/uploads/2017/08/ZX-Printer-Service-Manual.pdf before doing so.

The replacement belt is constructed with two holes opposite each other, at the same location where the pins and styluses are on original belt. The pins from the original belt must be pushed into these holes and the styluses secured onto the pins, with the little cap on top.

If you don´t have the original pins they can be substituted by 1mm solder, pianowire, TIG weldingwire or whatever you can source. It´s a quite fiddly job, but doable.

The styluses must be correctly and firmly mounted onto the pins and finally the caps must be pushed on top. The styluses must not move or rotate when mounted or anticipated function of the printer will be lost.

The styluses go one direction only over the paper.

One end touches the metal plate in the top cover, connected with the white wire, and the other end touches the paper.

At the right timing, the stylus gets voltage, what scorches the surface of the paper, resulting in black dots.

The longer bent end of the stylus must slide over the edge facing paper, not the shorter end.

Please read the manual carefully in order to mount the pins, styluses and caps correctly on the belt and position the belt correctly on the wheels.

Questions and Answers

Kargolama ve Ödeme

Item Location:
Stoke-on-Trent, Staffordshire, United Kingdom
Kargolama koşulları:
Alıcı ödemeli kargo
Shipping Costs:
  • Alıcı United Kingdom :
  • First Class Post : £1.80 For initial item, £0.12 Per additional item
Kargolama koşulları:
Ödeme türleri:
Paypal, Bank transfer

Satıcı: Rich Mellor t/as RWAP Software 3 Dale View Court Fulford, Stoke-on-Trent, Staffordshire, ST11 9BA, United Kingdom
All prices and shipping include VAT at 20.00% where applicable
VAT Number: GB326034531

The seller accepts all responsibility for this listing

Sayfa gösterimi: 641