Faites à ceci mon favori Replacement Belt for Sinclair ZX Printer

Catégorie:
Rétros Ordinateurs >> Sinclair >> Sinclair ZX Spectrum >> Components
Listing type:
Fixed Price Multiple Items
Item Condition:
New
Localisation du vendeur:
Stoke-on-Trent, Staffordshire, United Kingdom
Ending in:
28es jours, 19h : 54m : 16s
Quantity Available
11
Dernier acheteur:
T***t (2)
Budget fixe:
£16.80 Achat immédiat
20.00% VAT, Duty and handling fees may be payable on Price & Shipping on receipt
Shipping Costs:
A partir fe £1.80
Méthodes de paiement:
Pay Pal, Bank transfer FR
Number Sold:
3 (Visualiser l'historique)
Acheteur Valeur Date et heure Quantité achetée
T***t (2) £16.80 20/09/2022  12:05:11 1
d***e (33) £16.80 31/07/2022  22:22:32 1
B***K (1) £16.80 16/07/2022  16:10:54 1
Feedback on this Item
PositifPositif B***K (1) Great item, works a treat would definitely buy from you again! Quick delivery too!
Seller's Response
Thank you for you feedback-we appreciate it
05/08/2022  18:27:07

Item Number : 62398

Rencontrer le vendeur

rwap_software (3724) User Offline

Important: Message aux acheteurs

Product Waste:
We are registered for WEEE and the German Extended Producer Regulations (DE5098334825925)

 

COVID-19

We are continuing to trade as normal for now - but will be posting items only once per week.

When ordering 2+ different items from RWAP Software, please request an invoice so that we can combine shipping.

Contact the Seller
Ajouter aux favoris Vendeur
Autres Produits

Visualiser le boutique virtuelle RWAP Software - Retro computer specialists

Budget fixe: £16.80
Watch Item

Description

UK ONLY - for non-UK see:
https://www.sellmyretro.com/offer/details/43869

These are the replacement ZX Printer belts offered by Johan replacement ZX Printer belt is 3D printed in a material called TPU which is a highly flexible material. The shore hardness is 95A, very close to the original belt.

In order to use this belt you´ll have to dismantle the printer and we suggest you read the ZX Printer service manual found at https://spectrumforeveryone.com/wp-content/uploads/2017/08/ZX-Printer-Service-Manual.pdf before doing so.

The replacement belt is constructed with two holes opposite each other, at the same location where the pins and styluses are on original belt. The pins from the original belt must be pushed into these holes and the styluses secured onto the pins, with the little cap on top.

If you don´t have the original pins they can be substituted by 1mm solder, pianowire, TIG weldingwire or whatever you can source. It´s a quite fiddly job, but doable.

The styluses must be correctly and firmly mounted onto the pins and finally the caps must be pushed on top. The styluses must not move or rotate when mounted or anticipated function of the printer will be lost.

The styluses go one direction only over the paper.

One end touches the metal plate in the top cover, connected with the white wire, and the other end touches the paper.

At the right timing, the stylus gets voltage, what scorches the surface of the paper, resulting in black dots.

The longer bent end of the stylus must slide over the edge facing paper, not the shorter end.

Please read the manual carefully in order to mount the pins, styluses and caps correctly on the belt and position the belt correctly on the wheels.

Questions and Answers

Shipping and Payment

Item Location:
Stoke-on-Trent, Staffordshire, United Kingdom
Conditions de livraison:
Acheteur paie les frais de livraison
Shipping Costs:
  • À United Kingdom :
  • First Class Post : £1.80 Pour l'objet initial, £0.12 Par article supplémentaire
Limites d'expédition:
Non spécifié
Méthodes de paiement:
Pay Pal, Bank transfer FR

Vendeur: Rich Mellor t/as RWAP Software 3 Dale View Court Fulford, Stoke-on-Trent, Staffordshire, ST11 9BA, United Kingdom
All prices and shipping include VAT at 20.00% where applicable
VAT Number: GB326034531

The seller accepts all responsibility for this listing

Visites: 640