Dual 9 way D Userport Joystick with Piezo for Commodore PET PCB Only
- Category:
- Retro Computers >> Commodore >> Pet >> Hardware
- Listing type:
- Fixed Price Multiple Items
- Item Condition:
- New
- Seller location:
- Tynemouth, United Kingdom
- Ending in:
- 16 days, 23h:28m:35s
- Quantity Available
- 8
- Fixed price:
- £5.00
Buy now!
VAT, Duty and handling fees may be payable on Price & Shipping on receipt - Shipping Costs:
- From only £2.00
- Payment methods:
- Paypal
- Number Sold:
- 0 (View history)
Item Number : 64318
Meet the seller
tynemouthsw (113)
Feedback received in last 120 days :
94 times
- Positive: 94 (100%)
- Neutral: 0 (0%)
- Negative: 0 (0%)
Contact the Seller
Add Seller To Favourites
See Other Items
View webstore Tynemouth Software
Watch ItemDescription
This is the PCB to build a dual 9 way D joystick interface with piezo sounder for the Commodore PET Userport.
This is constructed with through hole parts (not included). The diodes are used to generate the fire signals, and the resistors protect the userport if it is configured as an output.
The value read is the position information from a standard Commodore / Atari style joystick with the usual pinout:
- 1 = Up
- 2 = Down
- 3 = Left
- 4 = Right
- 5 = N/C
- 6 = Fire
- 7 = N/C
- 8 = GND
- 9 = N/C
There is no power on the userport of the PET, so no autofire etc.
The value is read from port E841 (59457), and is best calculated using 255-PEEK(59457).
The values returned from this are as follows:
- 0x01 (1) = Port 1 Up
- 0x02 (2) = Port 1 Down
- 0x04 (4) = Port 1 Left
- 0x08 (8) = Port 1 Right
- 0x03 (3) = Port 1 Fire
- 0x10 (16) = Port 2 Up
- 0x20 (32) = Port 2 Down
- 0x40 (64) = Port 2 Left
- 0x80 (128) = Port 2 Right
- 0x30 (48) = Port 2 Fire
The Piezo is wired to pin CB2, as used in games such as Space Invaders. The Piezo is not required for Mini PETs or PET/CBM 4000/8000s as they already have an internal Piezo sounder. - see other listing for a version without the Piezo. Some of the photos show the version without the Piezo.
This listing is for the PCB only, all other parts will be required - see datasheet below. No PETs, Mini PETs, joysticks or games are included.
See my other listings for a full kit and assembled versions.
More information on my blog:
This is supported under Vice for development as PET userport joystick, and in the following games (and many others):
Questions and Answers
There are no questions yet
You need to be logged in to ask a question
Shipping and Payment
- Item Location:
- Tynemouth, United Kingdom
- Shipping conditions:
- Buyer pays shipping expenses
- Shipping Costs:
-
- To United Kingdom :
- First Class Post : £2.00 For initial item, £0.50 Per additional item
- To USA :
- Airmail Post : £3.00 For initial item, £5.00 Per additional item
- Intl Signed For : £10.00 For initial item, £2.00 Per additional item
- Shipment terms:
- The PCB is sent first class in card backed letter.
International orders may be subject to delays and additional customs fees. Please be aware of this before purchasing. - Payment methods:
- Paypal
The seller accepts all responsibility for this listing
Page view: 440